UV High Gloss Coating for Steel Almirah & Metal
Recure UV coating for metal is a clear, spray-on top UV coating that cures in seconds under UV lamps and gives almirahs and steel panels a high-gloss, scratch-resistant finish. Try it on your own panels first, with our technical team.
- Since 2011
- 600+ Customers
- Trial Available
- Technical Support
- Since 2011in printing and coating supplies
- 600+customers served
- 9 countriesexported to
- 4 locationsNew Delhi, Kolkata, Bongaon, Dhaka
- COA + TDSwith every batch
- D-U-N-S · FIEOregistered exporter
About Remedium
Remedium Enterprises Pvt Ltd has supplied printing consumables, UV coatings and UV curing systems since 2011. It was founded by Kanav Chadda. Recure is our own coatings brand, produced to our specifications with established manufacturing partners. A team of 25+ people serves 600+ customers from New Delhi, Kolkata, Bongaon and Dhaka, and we have exported to 9 countries.
Read more about us →UV coating problems that eat into your profit
Small problems on the line turn into rejected lots, returns and lost customers.
Pinholes
Rough finish, and panels go back for rework.
Cracks / Peeling after delivery
Dealers send almirahs back weeks later.
Gloss that doesn’t match
One odd panel, and the whole lot gets rejected.
Tacky panels
Panels stick and scratch when you stack them.
Yellowing
Light shades look old before they’re sold.
Scratches on the way
Damage in transit means returns or discounts.
Coating that arrives late
Your line stops and your orders slip.
No one to call
Days lost guessing while rejects pile up.
Why buy UV Coating for metal from Remedium
For each one: what we give you, why it works better, and what you get out of it.
Trial on your own panels
- We give
- A trial sample to run on your line
- Why it’s better
- You test with your own base coat and lamps, not a sample board
- You get
- No surprises after a bulk order
Help setting up your line
- We give
- Our team checks spray, film thickness and UV settings
- Why it’s better
- Most pinholes start with these settings
- You get
- Fewer pinholes and less rework
Documents with every batch
- We give
- COA, MSDS and TDS with every batch, plus a retain sample we keep
- Why it’s better
- You can check each lot before it hits your line
- You get
- Same gloss lot after lot, easy buyer approvals
Stock ready to ship
- We give
- 5 kg packs, immediate dispatch
- Why it’s better
- Repeat orders are planned with you
- You get
- Your line never waits for coating
Start small
- We give
- No fixed minimum order
- Why it’s better
- Try a small quantity before you commit
- You get
- Less cash tied up in stock
What it means for your profit
Where the money is saved on an almirah line.
More panels per shift
Cures in seconds, so panels are stacked and packed straight away.
Less rework
Fewer pinholes and less peeling means less sanding, recoating and wasted coating.
Fewer returns
A scratch-resistant finish survives transport, so fewer dealer returns and discounts.
Better selling price
A showroom-gloss finish helps your almirahs sell at a better price.
See it on a real panel
What the finish looks like
A short clip from a real panel. This is the gloss your buyers will see in the showroom.
- High-gloss, mirror-like finish
- Scratch-resistant once cured
- Cures in seconds under UV lamps
On the production line
How UV coating for metal is applied on an almirah line
Recure UV coating is sprayed as a clear top coat on steel almirah panels and cured under UV lamps on a conveyor in seconds.
Specifications
Recure UV coating for metal. Full technical values come in the TDS with your trial sample.
| Product | Recure UV Coating for Metal, by Remedium Enterprises Pvt Ltd |
|---|---|
| Used for | Steel almirahs, steel furniture, metal doors and panels |
| Colour | Clear top coat |
| Finish | High gloss |
| Application | Spray top coat, cured under UV lamps |
| Pack size | 5 kg |
| Trial | Trial sample available. No fixed minimum order. |
| Price | Price on request, based on your monthly requirement |
| Delivery time | Ready for immediate dispatch |
| Technical data | We share viscosity, film thickness and UV settings in the TDS along with your trial sample. |
How the trial works
Three steps, and our team is with you for all of them.
Tell us about your Production line
The metal you use, your base coat or print, and the UV lamps you run.
We send a sample
Then we talk you through spray and UV settings on a call.
Check the panels together
A thumb-twist test for cure, and a cross-hatch tape test (ASTM D3359, 4B–5B) for adhesion after 24 hours.
Partner with us
Open to dealers, distributors and agents
If you sell coatings or finishing supplies to almirah, steel furniture or metal panel makers, in India or abroad, we are happy to work with you as a dealer, distributor or agent. Recure UV coating goes on every panel, so your customers keep ordering, and our technical team supports them for you.
Questions we get asked a lot
How do I stop pinholes in UV coating on almirahs?
Start with your spray settings and film thickness. Pinholes usually come from trapped air, dirt or oil on the panel, or a coat that is too thick. During your trial, our team checks these with you so you can fix the cause before bulk production.
How do I stop a lot being rejected for a gloss difference?
Use the same coating batch after batch and keep your spray and UV settings the same on every run. Every Recure order comes with a COA (Certificate of Analysis), MSDS and TDS, and we keep a retain sample of every batch, so you can check a lot before it goes on the line.
Why is my UV coating peeling off metal?
It is usually the surface or the cure. Oil left on the panel, the wrong primer or base coat, a thick film or too little UV energy can all cause it. Send us photos on WhatsApp and we will help you find which one it is.
Why are my panels still tacky after UV curing?
Tacky panels mostly mean the coating is not fully cured. Old or weak lamps, a fast conveyor or a thick film are the usual reasons. Since we supply both the coating and the UV lamps, we can check the whole set-up with you.
Does UV coating turn yellow?
It can, if it is over-cured, applied too thick, or simply the wrong coating for the job. We look at your lamp settings and film thickness with you to keep whites and light shades looking clean.
Can I try Recure UV coating before ordering in bulk?
Yes. We send a trial sample so you can test it on your own panels. There is no fixed minimum order, and we share the price once we know your monthly requirement.
What help do I get after I buy?
Our technical team is available on phone, WhatsApp and video call for set-up, troubleshooting and training. You also get a COA, MSDS and TDS with every order.
How quickly can you deliver UV coating for metal?
Recure UV coating for metal comes in 5 kg packs and is ready for immediate dispatch. Tell us your monthly use and we will plan repeat orders so you never run short.
Do you also sell UV curing lamps and IR lamps?
Yes. We also supply UV curing lamps, IR lamps and LED curing systems, so you can buy your coating and your curing from one supplier.
Do you work with dealers, distributors and export buyers?
Yes. We work with dealers, distributors and export buyers in India and abroad. Call, WhatsApp or email us and we will talk about supply for your area.
How does UV coating improve my profit on an almirah line?
UV coating cures in seconds, so panels can be stacked and packed straight away instead of waiting to dry. A good cure also means fewer pinholes, less peeling and fewer scratches in transport, so you spend less on rework and returns. Share your daily panel count and reject rate, and we will work out the saving with you.
What our customers say
“They showed good dedication toward solving issues, made consistent efforts to address concerns, and maintained regular follow-ups.”
“Excellent service & quality… Valuable commitment….”
Contact Us
Send Your Requirement
Tell us what you print and what you need. Fill in the form and our team will get back to you shortly.
Our team will review your requirement. We then follow up with the right product and a quote.
- Phone+91 9911005168
- Emailgrowth@remedium.co.in
We also supply UV and IR lamps, and coatings for tiles
Buying your coating and your curing from the same place means one call when something’s off.
UV Curing Lamps
A full cure on every panel means fewer tacky panels and fewer rejects.
UV Spray High Gloss for Tiles
A mirror-like gloss with high scratch and stain resistance, so tiles look new for longer.